Laboratory
Collection Station
Chemical-Wastewater-ECA

Wastewater collection station for chemically contaminated laboratory wastewater

ECA

Our wastewater collection stations feature level monitoring, shut-off valves and two collection tanks, designed for filling the tanks with chemically contaminated laboratory wastewater.

The readiness of the individual tanks for filling is indicated by a light indicator (green). When a tank is full, a corresponding signal is given (red) and the further inflow of wastewater is shut off. Two collection tanks are available in the wastewater collection station, which can be used alternately.

Alternatively: Mobile solvent disposal
or Reception and collection station for radioactive wastewater

Intuitive operation:

You select the desired tank in the wastewater collection station using the selector switch; the motorised ball valve opens, allowing the line to be filled. The corresponding indicator light (green) signals that the tank is ready for filling. Reaching the maximum fill level is indicated by the red indicator light and the motorised ball valve closes automatically. The container can then be removed from the waste water collection station and emptied. Whilst the first container is being disposed of, it is possible to switch to filling the second container.
The mode of operation and control are identical. If the selector switch is set to the ‘Off’ position or the power supply to the wastewater collection station is interrupted, both motorised ball valves close via a spring-return motor and all indicator lights go out.

Maintenance of wastewater collection stations:

You should check the proper functioning of the level sensors quarterly by using the potentiometer to readjust the desired switching distance or sensitivity.
The wastewater collection station is inserted into the base cabinet. A shared connection socket, d=50 mm (PVC), is provided for the wastewater connection. The collection tanks are secured in the mounting frame.

Details:

Wastewater collection station chemical laboratory

The wastewater collection station consists of the following components:
1 base unit to accommodate 2 collection containers 2 wastewater collection containers (10 litres each) 2 green indicator lights 230 V/50 Hz ‘Container empty’ 2 red indicator lights 230 V/50 Hz ‘Container full’ 1 selector switch for selecting the tank	Wastewater connection: shared connection socket d=50 mm PVC Electrical connections: Power supply 230 V/50 Hz AC

The wastewater collection station consists of the following components:

1 base unit to accommodate 2 collection containers
2 wastewater collection containers (10 litres each)
2 green indicator lights 230 V/50 Hz ‘Container empty’
2 red indicator lights 230 V/50 Hz ‘Container full’
1 selector switch for selecting the tank

Wastewater connection:

shared connection socket d=50 mm PVC

Electrical connections:

Power supply 230 V/50 Hz AC

Note: For volatile, toxic substances, in addition to the wastewater collection station, you will require a suitable extraction unit, which is available from us.